This touchscreen is controlled using pressure sensing. The main part of the resistive touch screen is a resistive film screen with the display surface, which is a multilayer composite film, it is a layer of glass or hard plastic plate as the base, coated with a layer of transparent oxide metal (transparent conductive resistance) conductive layer, covered with a layer of surface hardening treatment, smooth anti-friction plastic layer, Its inner surface is also coated with a layer of coating, between them there are many small (less than 1/1000 inches) of the transparent isolation point between the two layers of conductive layer separated insulation. When the finger touches the screen, the two layers of conductive layer have contact at the touch point position, the resistance changes, the signal is generated in the X and y two directions, and then the touch screen controller is sent. The controller detects this contact and calculates the position (x, y), and then A bɛ baara kɛ ka kɛɲɛ ni sosɛti cogoya simulate ye. Nin ye sariya jɔnjɔn ye min bɛ se ka kɛ fɛnɲɛnamafagalan ye min bɛ se ka touch screen. walasa resistive touch screen ka se ka baara kɛ ni fɛn gɛlɛn ye.
Fɛn min bɛ se ka maga fɛn na min bɛ se ka kɛ fɛn ye, o ye fɛnw ye minnu bɛ kɛ ka fɛnw kɛ ka ɲɛ, olu ye: ITO, indium oxide, farikolo fanga barikama, a cogoya ye ni a janya bɛ jigin ka se 1800 (10-10 mɛtɛrɛ) bɛ barika sɔrɔ, yeelen jiginni 80%, o kɔfɛ, a bɛ dɔgɔya ka jigin, ka se 30
ITO ye fɛnba ye min bɛ kɛ resistive technology touch screen ani capacitive technology touch screens la, tiɲɛ na resistive ni capacitive technology touch screen ɲɛda ye ITO coating.
Nikɛri-gold coated, five-wire resistive touchscreen ni kɛnɛma conductive layer ni ductile nickel-gold coating material ye, ka da a kan kɛnɛma conductivite layer magali tuma caman na, ductile nickel-gold materials baara bɛ kɛ ka baara ɲɛnamaya janya, nka a kɛcogo musakaw ka bon. hali ni nickel conductive layer is good ductility, thusing as a resitive screen, resparent conductor, resparent, resparent, resparent, dɔrɔn, a tɛ se ka kɛ ko a bɛ se ka kɛ ko a bɛ se ka kɛ ko a bɛ se ka kɛ ko a bɛ se ka kɛ ko a bɛ se ka kɛ. Conductivity, ani nɛgɛ tɛ nɔgɔya ka se ka kɛ kelen ye kosɛbɛ, a man kan ka kɛ tension distribution layer ye, a bɛ se ka kɛ dɔrɔn i n’a fɔ exploration layer.
